• 7 inch colour touch screen display integrated in a
  plastic case with a cable length of 10 m
• Simple operator guidance by means of symbols
  (input of the outer diameter of the tube, wall
  thickness and choice of welding tool)
• Monitoring of gas and water cooling
• Tacking mode included
• Division of the welding parameters into up
  to 12 levels
• Automatic calculation - continuous or in step mode,
  according to the tube dimension and wall thickness
• Modification of the parameters by the
  current-percentage key
• The parameters current intensity and wire feed can
  be changed during the welding process by panel
• Circular display of the welding process
• Immediate documentation of the welding
  parameters in a PDF document
• Any necessary additional information for a detailed
  documentation can be entered directly
  by means of the panel
• Unlimited storage of welding programmes
• Storage of target and actual parameters in a PDF
  document on USB
• The welding programmes are saved by codification
• Software updates possible
• Monitoring of welding parameters
• Connection facility for oxygen analysers
• Servo PC board for wire feed
• External DIN A4 printers can be connected
• Multi-range 85 - 264 volt
• Inverter welding machine, DC, gas-cooled, multivolt
• TIG and MMA welding
• MMA pulsing and TIG kHz pulsing up to 15 kHz
• Spotmatic - saves 50 % of tacking time
• Connection capability for remote control and
  function torch
• 3 m mains supply lead with 16 A shock-proof plug
• 100 % tested and free-welded
• Overvoltage protection: No damage to machine
  caused if inadvertently connected to 400 V mains
  voltage
• External dimensions (LxBxH) 624 x 298 x 480 mm
• Weight 24 kg
• technical data: Inverter 200 (Autorange), Control range 5-200 A / 110/230V. (bei 115 VAC maximum voltage is maximum current 150A.

Option

• Sm@rtClient-APP for I-Phone/Pad or Android
• Remote maintenance by use of VPN connection