Inverter TX 300 AC/DC Comfort 2.0 Puls
- Modular AC/DC TIG inverter welding machine, gas- or
water-cooled - Comfort 2.0 control, simple operation with click wheel
- TIG welding
- Features characteristics for EWM activArc and EWM
spotArc at no extra charge - TIG welding with reproducible, electronic HF start
- TIG lift arc welding without HF
- Special AC welding procedure to join markedly
different aluminium plates together, e.g. welding
1-mm-sheet to a 10-mm-plate - Adjustable AC waveform, sine, trapezoidal, square
current - Adjustable AC frequency between 30 Hz and 300 Hz
- Adjustable AC balance, Pulse balance
- Automatic AC frequency
- TIG automated pulsing with automatic specification
of required pulse parameters - Metallurgical average value pulses (DC)
- Pulsed TIG welding in Hz and kHz range up to 15 kHz
- 8 programmed JOBs (welding tasks)
- Non-latched/latched operation
- Reduced secondary current accessible using torch
trigger - Spot welding/tacking function (spotArc / Spotmatic)
- Spotmatic and spotArc with direct access
- Adjustable up-slopes/down-slopes
- Spotmatic – halves time required for tacking
- Adjustable gas pre-flows/post-flows
- MMA welding
- MMA automated pulsing with automatic specification
of required pulse parameters - AC electrode welding
- Ideal for root welding
- Antistick function
- Safe, reliable vertical-up and vertical-down welding
- Adjustable hot start current and hot start time
- Adjustable Arcforce
Highlights:
- Safe ignition also for long hose packages
- Excellent torch cooling, resulting in cost savings on
consumables due to high-performance centrifugal
pump and 4-litre water tank (cool 41 U31 cooling
unit) - Energy-saving thanks to high efficiency and standby
function - High mains voltage tolerances and therefore fully
generator-compatible - Connection capability for remote control and
function torch - Trolly 35.2-2 trolley available for delivery
- Can be optionally connected to LAN or WiFi. Xnetcompatible
- PC interface for PC300.Net software